Polaris Sprotsman MV7 Owner'S Manual Download Page 47

Page: 47 / 131

FEATURES

Instrument Cluster

Your ATV is equipped with an instrument cluster that senses vehicle

speed from the right front wheel. The instrument cluster measures

distance in miles or kilometers as well as hours of operation. It also

includes a reverse speed limiter function that limits the ATV’s speed to

approximately 7-9 mph. Refer to page 33 for additional information.

1. Rider Information Center
2. Speedometer needle - in addition to showing vehicle speed, the

needle flashes when a warning condition exists.

3. Speedometer

CAUTION

To prevent damage, wash the vehicle by hand or with a garden

hose using mild soap. Do not use alcohol to clean the instrument

cluster. Immediately clean off any gasoline that splashes on the

instrument cluster. Do not allow insect sprays to come into

contact with the lens.

Summary of Contents for Sprotsman MV7




































































































































Search results

Summary of Contents for Sprotsman MV7

Reviews:

Brands by name

Popular brands

Polaris Sprotsman MV7, Owner'S Manual

Search results

Summary of Contents for Sprotsman MV7

Reviews:

Brands by name

Popular brands