Polaris Sportsman XP 1000 Owner'S Manual Download

Page: 20 / 167

SAFETY

Safety Labels and Locations

Warning labels have been placed on the vehicle for your protection.

Read and follow the instructions on each label carefully. If any of the

labels shown in this manual differ from the labels on your vehicle,

always read and follow the instructions of the labels on the vehicle.

Replacement

safety

labels are provided by POLARIS at no charge. The

part number is printed on the label.

Sportsman XP 1000 Zugmachine Labels

General Alert (7181539)

Before you operate this vehicle, read the owner’s manual. Never allow anyone

under 16 years of age to operate this vehicle. Wear approved helmet, goggles,

and protective clothing. Never use alcohol or drugs before or while operating.

NEVER carry a passenger. This vehicle is approved for onroad use.

Override Alert / 4X4 (AWD) Alert (7182094)

Improper use of override button can lead to loss of control resulting in severe

injury or death. Do not activate override while throttle is engaged. Always apply

throttle gradually while in reverse.
Do not push switch to engage 4X4 (AWD) if the rear wheels are spinning. This

may cause severe drive shaft and clutch damage.

Hill Operation Alert (7181426)

Never operate this vehicle on HILLS steeper than 25

General Alert

Hill Operation Alert

Override Alert

4X4 (AWD) Alert

7182094

SPEEDO
REVERSE
OVERRIDE

7181426

7181539

Summary of Contents for Sportsman XP 1000








































































































































































Search results

Summary of Contents for Sportsman XP 1000

Reviews:

Related manuals for Sportsman XP 1000

Brands by name

Popular brands

Polaris Sportsman XP 1000, Owner'S Manual

Search results

Summary of Contents for Sportsman XP 1000

Reviews:

Related manuals for Sportsman XP 1000

Brands by name

Popular brands