69
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 64. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Lube
Capacity at
Fluid Change
Inspection
Procedure
Engine Oil
PS-4 PLUS Performance
Synthetic 2W-50
2 qt. (1.9 l)
See page 70.
Brake Fluid
DOT 4 Only
---
See page 30.
Transmission Oil Polaris AGL Synthetic
Gearcase Lube
15 oz. (450 ml) See page 73.
Demand Drive
Fluid (Front
Gearcase)
Demand Drive Plus Fluid
9 oz. (265 ml)
See page 74.
Rear Gearcase
Oil
ATV Angle Drive Fluid (or
GL5 80-90 weight gear
lube)
5 oz. (150 ml)
See page 76.
Front Prop Shaft
Yoke
Polaris Premium U-Joint
Lube
---
Grease fittings (3
pumps maximum) every
500 miles, before long
periods of storage, or
after pressure washing
or submerging.
Front Prop Shaft Yoke
