background image

122

WARRANTY

LIMITED WARRANTY

Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIM-

ITED WARRANTY on all components of the Polaris All Terrain Vehicle (ATV) against 

defects in material or workmanship. Polaris also gives a one year limited warranty on 

the final drive chain for failure due to defects. This warranty covers the parts and labor 

charges for repair or replacement of defective parts which are covered by this warranty. 

This warranty begins on the date of purchase. This warranty is transferable to another 

consumer during the warranty period through a Polaris dealer. 

REGISTRATION

At the time of sale, the Warranty Registration Form must be completed by your dealer 

and submitted to Polaris within ten days. Upon receipt of this registration, Polaris will 

record the registration for warranty. No verification of registration will be sent to the 

purchaser as the copy of the Warranty Registration Form will be the warranty entitle-

ment. If you have not signed the original registration and received the customer copy, 

please contact your dealer immediately. NO WARRANTY COVERAGE WILL BE 

ALLOWED UNLESS YOUR ATV IS REGISTERED WITH POLARIS. 
Initial dealer preparation and set-up of your ATV is very important in ensuring trouble-

free operation. Purchasing a machine in the crate or without proper dealer set-up will 

void your warranty coverage.

WARRANTY COVERAGE AND EXCLUSIONS:
LIMITATIONS OF WARRANTIES AND REMEDIES

The Polaris limited warranty excludes any failures that are not caused by a defect in 

material or workmanship. This warranty does not cover accidental damage, normal wear 

and tear, abuse or improper handling. This warranty also does not cover any ATV that 

has been altered structurally, modified, neglected, improperly maintained, used for rac-

ing, or used for purposes other than for which it was manufactured, or for any damages 

which occur during trailer transit or as a result of unauthorized service or the use of 

unauthorized parts. In addition, this warranty does not cover physical damage to paint or 

finish, stress cracks, tearing or puncturing of upholstery material, corrosion, or defects in 

parts, components or the ATV due to fire, explosions or any other cause beyond Polaris' 

control.

Summary of Contents for Sportsman 9922249











































































































































Reviews: