67
OPERATION
Driving Safely
Driving Through Water
Your ATV can operate through
water with a maximum recom-
mended depth equal to the bot-
tom of the footrests. Follow
these procedures when operat-
ing through water:
1. Determine water depths and
current before crossing.
2. Choose a crossing where
both banks have gradual
inclines.
3. Proceed slowly, avoiding
rocks and obstacles.
4. After crossing, dry the brakes by applying light pressure to the lever
until braking action is normal.
After running the vehicle in water, it's critical to have it serviced as out-
lined in the maintenance chart. See page 72. The following areas need
special attention: engine oil, transmission oil, demand drive fluid, rear
gearcase oil, and all grease fittings.
NOTE:
Avoid operating the vehicle through deep or fast-flowing water. If you
cannot avoid water that exceeds the recommended maximum depth,
go slowly, balance your weight carefully, avoid sudden movements,
and maintain a slow and steady forward motion. Do not make sudden
turns or stops, and do not make sudden throttle changes.
If your vehicle becomes immersed, and it's impossible to take it to a
dealer before starting it, follow the steps described on page 102. Have
the vehicle serviced by your dealer at the first opportunity.
CAUTION
Major engine damage can result if the vehicle is not thoroughly inspected
after operation in water. Perform the services outlined in the maintenance
chart.
If your vehicle becomes immersed or is operated in water that exceeds the
footrest level, take it to your dealer for service before starting the engine.
Maximum
Depth
