Polaris Sportsman 90 Safety And Maintenance Manual Download

Page: 78 / 220

OPERATION WARNINGS

POTENTIAL HAZARD Operating this ATV through deep or fast flowing water.

WHAT CAN HAPPEN

Tires may float, causing loss of traction and loss of control, which could lead to an

accident.

HOW TO AVOID THE HAZARD

Avoid operating the ATV through deep or fast flowing water. If you canot avoid

water which exceeds the recommended maximum depth, go slowly, balance your

weight carefully avoiding sudden movements, maintain a slow and steady forward

motion, do not make sudden turns or stops, and do not make sudden throttle

changes. See page 98.

Remember that wet brakes may have reduced stopping ability. Test your brakes

after leaving water. If necessary, apply them several times to let friction dry out

the pads.

WARNING

Summary of Contents for Sportsman 90





























































































































































































































Search results

Summary of Contents for Sportsman 90

Reviews:

Related manuals for Sportsman 90

Brands by name

Popular brands

Polaris Sportsman 90, Safety And Maintenance Manual

Search results

Summary of Contents for Sportsman 90

Reviews:

Related manuals for Sportsman 90

Brands by name

Popular brands