manualshive.com logo in svg

Polaris Sportsman 850 2021, Owner'S Manual

Share
Download
Polaris Sportsman 850 2021 Owner'S Manual Download Page 2

WARNING

Operating, servicing, and maintaining a passenger vehicle or off-road 

vehicle can expose you to chemicals including engine exhaust, carbon 

monoxide, phthalates, and lead, which are known to the State of California 

to cause cancer and birth defects or other reproductive harm. To minimize 

exposure, avoid breathing exhaust, do not idle the engine e

xc

e

p

t as 

necessary, service your vehicle in a well-ventilated area and wear gloves 

or wash your hands frequently when servicing your vehicle. 

For more information go to www.P65Warnings.ca.gov/passenger-vehicle.

!

WARNING

Read, understand, and follow all of the instructions and safety

precautions in this manual and on all product labels.

Failure to follow the safety precautions

could result in serious injury or death.

For videos and more information

 

about a safe riding experience with

 

your Polaris vehicle, scan this QR

 

C

ode

®

 with your smartphone.

!

A card containing important ATV safety information should be attached to

the owner’s manual on the next page. If you cannot locate this card, or if it

has been removed, please call 1–800–342–3764 for assistance.

Summary of Contents for Sportsman 850 2021





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands