Polaris Slingshot R 2020, Owner'S Manual

Page: 119 / 173

5. View the fluid level in the reservoir. If the fluid level is below the MIN line on
the reservoir, remove the cap and add the recommended fluid to the MAX
line. Do not overfill.
6. Reinstall the reservoir cap.
7. Depress the clutch pedal forcefully for a few seconds. Check for fluid leakage
around the clutch reservoir fittings.
CLUTCH FLUID CHANGE
Always change fluid if the fluid becomes contaminated, if the fluid condition is
questionable, or if the type and brand of the fluid in the reservoir are unknown.
1. Position the vehicle on a level surface.
2. Place the transmission in gear.
3. Open the hood.
4. Wipe the fluid container and the area around the reservoir cover with a clean
cloth.
WARNING
Using the wrong fluid or allowing air or contaminants into the fluid system can
damage the system seals or result in a malfunction that could lead to serious
injury or death. Do not operate the clutch while the reservoir cover is removed.
Fluid could overflow from the reservoir and cause air to enter the fluid system.
5. Using a syringe or vacuum-type tool, remove the old fluid from the fluid
reservoir.
6. Refill the reservoir to the MAX line with the recommended fluid. Do not
overfill.
7. Reinstall the reservoir cap.
8. Depress the clutch pedal forcefully for a few seconds. Check for fluid leakage
around the clutch reservoir fittings.
117
MAINTENANCE