Polaris Slingshot R 2020, Owner'S Manual

Page: 93 / 173

MAINTENANCE
INTRODUCTION
Proper maintenance assures the highest level of safety, durability and
dependability for your SLINGSHOT vehicle.
Owners are responsible for performing the scheduled maintenance identified in
this owner’s manual.
• Your authorized SLINGSHOT dealer can perform the break-in maintenance
procedures when the vehicle’s odometer registers 500 miles (800 km).
• See your dealer or perform the recommended periodic maintenance at the
intervals specified in the Periodic Maintenance Chart beginning on page 94.
Any qualified repair shop or person may maintain, replace, or repair the
emission control devices or systems on your vehicle. An authorized POLARIS
dealer can perform any service that may be necessary for your vehicle.
POLARIS also recommends POLARIS parts for emissions related service.
However, equivalent parts may be used for such service. It is a potential
violation of the Clean Air Act if a part supplied by an aftermarket parts
manufacturer reduces the effectiveness of the vehicle's emission controls.
Tampering with emission controls is prohibited by federal law.
BREAK-IN MAINTENANCE
Your dealer can perform the break-in maintenance procedures when the
vehicle’s odometer registers 500 miles (800 km). Performing the break-in
maintenance will help ensure optimum engine performance for the entire service
life of the engine. Your dealer can change engine oil, inspect all fluids and
serviceable components, ensure that all fasteners are tightened and make other
adjustments as needed.
MAJOR MAINTENANCE
For major repair information, refer to the SLINGSHOT Service Manual . Major
repairs typically require technical skills and specially designed tools. Emission
system service requires special tools and training and should be performed by
your dealer.
91
MAINTENANCE