Polaris RZR XP 1000 EPS 2019 Page 46 Owner'S Manual Download

Page: 46 / 194

GEAR SELECTOR

P: Park

R: Reverse

N: Neutral

L: Low Gear

H: High Gear

To change gears, stop the vehicle, and with the engine idling, move the lever

to the desired gear. Do not attempt to shift gears with engine speed above idle or
while the vehicle is moving.

TIP

Maintaining shift linkage adjustment is important to assure proper transmission

function. Your POLARIS dealer or qualified person can assist in resolving any

shifting problems.

NOTICE

Do not attempt to shift the transmission while the vehicle is moving or damage

to the transmission could result. Always shift when the vehicle is stationary and

the engine is at idle.

USING LOW RANGE

Always shift into low gear for any of the following conditions:

• Operating in rough terrain or over obstacles
• Loading the vehicle onto a trailer
• Towing heavy loads

FEATURES AND CONTROLS

Summary of Contents for RZR XP 1000 EPS 2019



































































































































































































Search results

Summary of Contents for RZR XP 1000 EPS 2019

Reviews:

Related manuals for RZR XP 1000 EPS 2019

Brands by name

Popular brands

Polaris RZR XP 1000 EPS 2019, Owner'S Manual

Search results

Summary of Contents for RZR XP 1000 EPS 2019

Reviews:

Related manuals for RZR XP 1000 EPS 2019

Brands by name

Popular brands