Polaris RZR XP 1000 EPS 2019, Owner'S Manual

Page: 161 / 194

4. Secure the vehicle.
WARNING
Vehicles equipped with DYNAMIX active suspension must be powered on, set
to COMFORT mode, and properly functioning in order to ensure the shocks
are operating at their minimum compression damping setting prior to securing
the vehicle for transport. Failure to ensure the shocks are in their minimum
compression damping setting prior to securing the vehicle can potentially lead
to a reduction of intended strap tension while trailering.
5. After the vehicle has been secured, verify the gauge indicates PARK, and
turn the vehicle power off. On DYNAMIX equipped models, verify also that
the suspension compression damping values are still soft after securing the
vehicle. If after securing the suspension demo mode has timed out or the
suspension has moved to a FIRM setting as indicated on the Suspension
control screen, cycle the key switch, place the mode switch in COMFORT
mode, and re-tighten the straps per step number 3.
6. Remove the key to prevent loss during transporting. Secure the fuel cap and
seats. Ensure that the seats are attached correctly and are not loose.
WARNING
Cargo and other loose vehicle parts may fly off while transporting this vehicle.
Secure or remove all cargo, and inspect the unit for loose parts prior to
transport.
7. Always tie the frame of the POLARIS vehicle to the transporting unit securely
with suitable straps or rope. Do not attach tie straps to the front control arm
bolt pockets.
159
MAINTENANCE