Polaris RZR Pro R 2022, Owner'S Manual

Page: 65 / 195

1. Press and hold the MODE button to enter the “OPTIONS” menu.
2. Use the UP/DOWN toggle buttons to cycle through options until “REQUIRE
PIN TO START” appears. Press the MODE button to select.
3. If required, “ENTER NEW PIN” will appear. Use the UP/DOWN toggle
buttons to cycle to your desired first digit. Press the MODE button to select
the digit.
4. Continue until all four digits of your desired passcode have been selected.
Once finished, “NEW PIN SET” will flash momentarily and then revert back to
the “REQUIRE PIN TO START” screen.
Please record your passcode.
5. To enable your new passcode, use the UP/DOWN toggle buttons to change
the flashing “OFF” at bottom of screen to “ON”. If this step is skipped, P.A.
S.S. will not be enabled.
6. Press the MODE button to re-enter the “OPTIONS” menu. The vehicle will
now require passcode entry before next startup.
You can exit the “OPTIONS” menu three different ways.
• Toggle to “EXIT” and press the MODE button.
• Hold the MODE button for a few seconds.
• Do nothing, allowing the system to automatically revert back to the main
screen.
NOTICE
If the battery becomes low while the P.A.S.S. system is enabled, the gauge
may show “New Vehicle Detected” after the battery has been recharged/
replaced. Leave the key in the ON position to allow system reconfirmation.
DISABLE P.A.S.S.
1. Press and hold the MODE button to enter the “OPTIONS” menu.
2. Use the UP/DOWN toggle buttons to cycle through options until “REQUIRE
PIN TO START” appears. Press the MODE button to select.
3. Enter current passcode.
4. Use the UP/DOWN toggle buttons to change the flashing “ON” at bottom of
screen to “OFF”.
5. Press the MODE button to re-enter the “OPTIONS” menu. P.A.S.S. is now
disabled.
You can exit the “OPTIONS” menu three different ways.
63
FEATURES AND CONTROLS