Polaris Ranger 4X4 Owner'S Manual Download Page 17

Page: 17 / 124

SAFETY

Operator Safety

Equipment Modifications

We strongly recommend that consumers do not install on a Polaris

RANGER

any equipment that may increase the speed or power of the

vehicle, or make any other modifications to the vehicle for these pur-

poses. Any modifications to the original equipment of the vehicle create

a substantial safety hazard and increase the risk of bodily injury.
The warranty on your Polaris

RANGER

is terminated if any equipment

has been added to the vehicle, or if any modifications have been made to

the vehicle, that increase its speed or power.
The addition of certain accessories, including (but not limited to) mow-

ers, blades, tires, sprayers, or large racks, may change the handling char-

acteristics of the vehicle. Use only Polaris-approved accessories, and

familiarize yourself with their function and effect on the vehicle.

Summary of Contents for Ranger 4X4





























































































































Search results

Summary of Contents for Ranger 4X4

Reviews:

Related manuals for Ranger 4X4

Brands by name

Popular brands

Polaris Ranger 4X4, Owner'S Manual

Search results

Summary of Contents for Ranger 4X4

Reviews:

Related manuals for Ranger 4X4

Brands by name

Popular brands