Polaris PVCR 3200 IQ Home Aqua Black, Operation Manual, Page: 83 / 175

83
1. Push and hold down button , until acoustic signal, or until the Wi-Fi indicator starts to
flash quickly at acoustic signal disabled.
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of WiFI
network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
Pairing a previously configured appliance:

The "Home" screen: click on "Add Appliance".

Look through the "Next to You" list to select the vacuum cleaner (PVCR-3200) (If the appliance in
absent, make sure your mobile device is connected to the WiFi network the applicance is configured for).

Then follow prompts in the next screen to pair the appliance:
1. Push and hold down button , until acoustic signal, or until the Wi-Fi indicator starts to
flash quickly at acoustic signal disabled.
2. Then click on "Continue" in the application
The appliance reconfiguration for another Wi-Fi network (diagnostics mode):

, Push and hold down button until acoustic signal, or until the Wi-Fi indicator starts to
flash quickly at acoustic signal disabled.

Push button , again, and hold it down until acoustic signal (or until the Wi-Fi indicator
starts to slowly flash).

Click on "New Appliance" on the "Home" screen.

Select the vacuum cleaner (PVCR-3200) in the "All Appliances" list.

Click on "Continue"

The application prompts you to establish connection with WiFi-network “PVCR-3200”, click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Push and hold down button , until acoustic signal, or until the Wi-Fi indicator starts to
flash quickly at acoustic signal disabled.
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of WiFI
network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
VACUUM CLEANER RESET TO ORIGINAL WIFI SETTINGS:
1. Push and hold down button , until acoustic signal, or until the Wi-Fi indicator starts to
flash quickly at acoustic signal disabled.