Polaris PVCR 3200 IQ Home Aqua Black, Operation Manual, Page: 81 / 175

81
You can also download thew application by the link to web-site
www.polar.ru
in the section dedicated to
this version of vacuum cleaner.
This application enable you to:

Register your robot

Set a cleanup schedule, start, stop, or cancel vacuuming cycles

Adjust vacuuming settings

Trace the vacuuming progress

Name your robot

Get access to the appliance adjustment guidelines

Find answers to FAQ

Automatically update software

Contact the support service.
The vacuum cleaner Wi-Fi network connection setup
Attention: Prior to connecting to Wi-Fi network, install the vacuum cleaner on the charge base in
avoidance of failure due to the battery discharge during setup.

Plug the charge base into a power network through the standard adapter.

Set the switch on the vacuum cleaner to the position I.

Put the vacuum cleaner on the floor, and direct it to the charge base by pushing button on the
control unit. If the appliance fails to switch on, install it on the charge base manually, or connect to it the
charge adapter.

Open application Polaris IQ Home in your mobile device.
Important! Always download a firmware update for the device if the application prompts you to do so.
For phone with operating system Android:
New appliance configuration

The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-3200) in the "All Appliances" list

Click on "Settings Access" to open the Wi-Fi settings on your phone

Connect your phone to Wi-Fi network coinciding with the vacuum cleaner name (PVCR-3200)

Return to the application

Then follow prompts in the next screen to pair the appliance: