12
Before the first use
Get the radiator out of the box and place it on the foam plastic cover. Make sure whether the power
cable and the device were not damaged during the transportation.
Assembly instruction
•
The roller-legs should be installed before operating the radiator.
•
Turn over the radiator to have access to bottom panel. Make sure that the device is on a flat
surface and there is nothing to scratch the surface of radiator.
•
Put the wheels assemblies onto the radiator by placing the U-shaped bolts between the
outermost fins on each side of the radiator (see Fig. 1-4).
•
Securely fasten the wheels assemblies onto the radiator by screwing the wing nuts onto the
bolts (see Fig. 5).
•
Turn over the radiator in normal position and put it in vertical position.
Warning!
Please operate the radiator in normal vertical position. Any other position can create a
hazardous situation.
The radiator operation
Make sure that the radiator is placed in vertical position to reduce the risk of overheating,
fire or electric shock.
Don’t switch on the appliance in case it is damaged.
•
Before plugging the device in outlet, please make sure, that thermostat knob is turned to
“MIN” position and the power switch is set to “0” for off. Then insert the plug into outlet.
•
Press the power switches to the relevant necessary position:
“MIN” – minimum heating, power 600 W
“MED” – medium heating, power 900 W
“MIN+MED” – maximum heating, power 1500 W.
•
Please rotate clockwise the thermostat controller up to «max» position.
Summary of Contents for PRE K 0715
Page 1: ...Библиотека СОК ...
