7
4.
Press the MODE sensor to select the operating mode - weighing in grams. The indicator of the selected operating mode will be displayed in the lower left corner of
the display:
5.
Put the product on the platform.
6.
The product weight will be shown on the display.
7.
To correctly display the weight of the product it should not be heavier than 10 kg.
Determination of milk/water volume (Fig. 6)
1.
Place the scale on a firm, horizontal surface.
2.
Turn on the scales by clicking on the center of the weighing platform.
3.
Wait until the display shows the 0 value.
4.
Press the
MODE
sensor to select the operating mode - determination of milk/water volume. The indicator of the
selected operating mode will be displayed in the lower-left corner of the display
or
5.
Place an empty liquid container on the weighing platform. The display will show the weight of the container.
6.
Press the
TARE
sensor to zero the container weight. The display will show the
0 value
.
7.
Pour water/milk into the container. The display will show the volume of water/milk in ml.
8.
Press the
MODE
sensor to determine the weight of water/milk in g.
TARE function
The TARE function is intended for weighing products in an additional container, as well as for weighing several consecutive loads.
1.
Place the reservoir on the glass platform of the scale. The display will show the weight of the reservoir.
2.
Press the
TARE
sensor. The display will reset to zero. In the upper left corner (if the tare weight exceeds 400 g) the
will be displayed or
(if the container
weighs up to 400 g).
3.
Put the food products in the reservoir. The display will show the weight of the products without taking into account the weight of the reservoir.
4.
This process can be repeated several times. Before weighing the next loads press the
TARA
sensor, wait until
0
is displayed, then place other products in the
reservoir.
The maximum allowable weight of 10 kg is indicated taking into account the weight of the zeroed tares.
The display will show a negative weight value if you remove the item to be weighed from the platform while the TARE function is on.
To reset and start a new weighing, touch the
tare
zeroing sensor again.
Error display information
LO
- change the batteries
Err
- scales overloading. Remove the products exceeding the maximum weight from the scales. The maximum weight, including zeroed tare, is 10 kg.
Cleaning and care
•
Do not use abrasive or chemical products to clean the scales.
•
Wipe the scales with a slightly damp cloth.
Storage
•
Store the device in a cool, dry place in horizontal position.
•
Make sure that there are no objects on the scales during storage.
•
For the long-term storage remove the batteries from the scales.
•
Electrical devices are stored in a closed, dry and clean room at an ambient temperature of no higher than 40 °C with relative humidity not higher than 70% and no
dust, acid or other vapours in the environment that negatively affect the materials of the electrical device.
Transportation
Electrical devices are transported by all means of transport in accordance with the rules for that particular type of carriage of goods in place on a particular type of transport.
When transporting the device, use the original factory packaging.
Transportation of devices should exclude the possibility of direct exposure to atmospheric precipitation and aggressive environments.
Note: At the end of the useful life of the device do not dispose of it with the ordinary household waste, but return it to an official collection point for recycling. Thus, you will
help to save the environment.
Sales
Sales rules have not been established.
Disposal requirements
According to WEEE 2012/19/EU on waste electrical and electronic equipment Directive, do not dispose of the devices with the household waste. It should
be transferred to an official separate waste collection center.
Troubleshooting
Malfunction
Cause
Troubleshooting process
Scales do not work
Scales are not turned on
Turn on the scales
The battery capacity has run out
Change the battery
The display readings do not match the true
value.
Invalid unit of measurement was selected
Use the sensor to select the unit you want. To obtain an accurate
weight value, a number of conditions should be observed:
- install the balance only on a flat horizontal surface,
- avoid sudden movements and swaying during weighing.
Mandatory weighing conditions are not met
The scales shut off automatically.
The scales automatic shutdown system activated
The scales automatically shuts off upon the completion of their
operation.
Attention!
If you cannot resolve the problem on your own using the steps described above, please contact your POLARIS Authorized Service Center.
Technical specifications
−
Maximum allowable weight:
10 kg
−
Readability: 1 g
−
Power supply: 1 х CR2032 Lithium battery (the battery is included)
−
The information on the month and year of manufacture is indicated on the nameplate of the device.
