Polaris PCWH 2063Di, Manual Instruction

Page: 9 / 13

Description
Installation.

The heater should be situated at
least 1.8 meter above the floor.
Fig.2

The plug and power cord should
be installed on height unavailable
for children.

You need the following
for installation: 2 soft
inserts, 2 screws, 4 gaskets
(all mentioned you will find
in gift box). Fig.3.

Please, insert the gaskets
into the holes in body. Fig. 4.

You should make the holes in the wall on 57 cm from each other horizontally and at least on 2 m over
the floor. This way the heater should be at least on 1.8 m from the floor level. See fig. 2, 5 and 6

The depth of the holes in wall should be 42-45 mm, of 8 mm diameter. The tighten screw should be
protruded from the wall on 18-20 mm.
Fig. 4
The hole for gasket
The hole for the gasket
Body
The hole for the screw
Soft
inserts
Gasket
Screws
Fig. 3
Fig 2
floor
Wall
Fig. 1
Remote control
Body
Swing leafs
Air inlet LED display
TIMER
button
Function
button