14
Reverse Camera wiring
H
Back of Hilux Maxx
Red = 12 Volt positive
Black = Ground
Cam In
You will need to tap into the
Reversing wire (orange wire with
black stripe) and run the wire to the
reverse Light positive to trigger the
camera when the vehicle is in reverse.
2 cam operation (e.g., car and caravan setup or front
camera)
H
Back of Hilux Maxx
Front Cam In
Red = 12 Volt positive (suggested
source: Accessories power)
Black = Ground
We don’t suggest picking up power
from the front cam in power wires.
Sometimes the 12 volt is not strong
enough to power some cameras.
Even though the actual input is labelled as front camera, you can still use this input for a second reverse camera. The actual
head unit has an icon on the screen labelled CAM and this can toggle between the 2 cameras installed (regardless if it’s a
front camera or a second rear vision camera). If you want 3 cameras then we suggest purchasing a 2 way control box, see
page 15
Toggling between the 2 cameras without a Control Box
When you engage reverse the unit will always default to your tow vehicle reverse camera, to toggle to your second rear
camera while the vehicle is in reverse press the button on your head unit.
To view any of the cameras whilst driving, select the Cam icon. It will default to the second camera automatically and if you
wish to view your tow vehicle reverse camera, press the on the touch screen.
15 pin plug