Polaris Hawkeye 2X4 2010 Owner'S Manual Download

Page: 9 / 126

INTRODUCTION

Failure to follow the warnings in this manual can result in serious injury or death.

This Polaris vehicle is not a toy and can be hazardous to operate. A collision or

rollover can occur quickly, even during routine maneuvers, if you fail to take

proper precautions.
Read and understand your owner's manual and all warnings before operating

this Polaris vehicle.

Safety Training

When you purchased your new Polaris vehicle, your dealer offered a

hands-on safety training course. You were also provided with printed

materials that explain safe operating procedures. Review this informa-

tion on a regular basis.
If you purchased a used Polaris vehicle from a party other than a Polaris

dealer, please request free safety training from any authorized Polaris

dealer.

Age Restrictions

This vehicle is an ADULT VEHICLE ONLY. Operation is prohibited

for anyone under 16 years of age.

Restrictions

This vehicle is approved for OFF-ROAD TOWING ONLY. Towing a

trailer with this vehicle on public roads is prohibited.

Equipment Modifications

The warranty on your Polaris vehicle may be terminated if any equip-

ment has been added, or if any modifications have been made, that

increase speed or power. The addition of certain accessories, including

(but not limited to) mowers, blades, tires, sprayers and large racks may

change vehicle handling. Use only Polaris-approved accessories. Know

their function and effect on the vehicle.

WARNING

Summary of Contents for Hawkeye 2X4 2010































































































































Search results

Summary of Contents for Hawkeye 2X4 2010

Reviews:

Related manuals for Hawkeye 2X4 2010

Brands by name

Popular brands

Polaris Hawkeye 2X4 2010, Owner'S Manual

Search results

Summary of Contents for Hawkeye 2X4 2010

Reviews:

Related manuals for Hawkeye 2X4 2010

Brands by name

Popular brands