background image

17

SAFETY

Safety Labels and Locations

Clutch Cover Warning

WARNING
NO STEP
• Moving parts hazard under belt-clutch guard. To prevent serious injury, do not 

operate vehicle with guard removed.

• Do not modify engine or clutch. Doing so can cause part failure, possible 

imbalance, and excessive engine RPM, which can result in serious injury or 

death.

Rack Warning, Front and Rear

WARNING
• DO NOT TOW FROM RACK OR BUMPER. Vehicle damage or tipover may 

result causing severe injury or death. Tow only from tow hooks or hitch.

• Max Rack Loads: Front 70 lbs. (32 kg) Rear 100 lbs. (46 kg)

Reverse Override Warning (4X4 Models)

WARNING
Improper use of override button can lead to loss of control resulting in severe 

injury or death. Do not activate override while throttle is engaged. Always apply 

throttle gradually, while in reverse.

Override Switch (2X4 Models)

Reverse speed is limited. Reverse override is controlled by the override switch. 

See your Owner's Manual.

All Wheel Drive Switch (4X4 Models)

Do not push switch to engage AWD if the rear wheels are spinning. This may 

cause severe drive shaft and clutch damage. See your Owner's Manual.

Hitch Capacity Label

TRAILER MAX WEIGHT:
750 LBS. (340 KG) ON LEVEL GROUND
HITCH MAX. VERTICAL WEIGHT: 75 LBS. (34 KG)

Summary of Contents for Hawkeye 2X4 2010































































































































Reviews: