Polaris Easy Cast, Instruction Manual

Page: 36 / 42

34
Cleaning
Keep the device body clean using dry fabric. Wet the cloth with little water or a
non-greasy solution, if needed (only do this for body cleaning).
Users should make sure the device is kept clean and free of dust water and
other unexpected solutions.
At the end of each operation and when the device is on OFF mode and stable,
cleaning should be done.
If the user decides that the internal parts need cleaning, he/she should contact
the after-sales service department.
Periodic maintenance
Inspection and periodic cleaning of the device depends on the operation level.
It is suggested for the user to inform the company experts about the workflow
through consultation after installation and learn the appropriate time for an
inspection and periodic cleaning from them. If the user detects any damage
or exhaustion during periodic inspections, he/she should contact the after-
sales services department, so that measures are taken for maintenance and
compulsory service.
Periodic service should be determined by the user and is performed by the
after-sales services department. It is suggested that the maximum time interval
for periodic repairs be 12 months.
Put the main button on the off position before cleaning external parts
of the device. It is forbidden to clean the device while it is plugged.
Never use combustible, corrosive, base or toxic solutions for
cleaning the device.