Polaris Easy Cast, Instruction Manual

Page: 29 / 42

27
Casting Machine
Easy cast
-Place the ring base on the arm.
-Rotate the arm till it is in the correct position (the alarm sounds and the indicator
light turns on).
-Lift the induction coil until it has surrounded the crucible. The crucible must be
positioned such that it does not touch the coil at all.
-Close the top lid.
-Operate the “Fusion” switch to start the melting process.
the appropriate amount of time needed for melting 25gr of none-precious
alloys is between 1 to 1.45 minutes.Upon exerting of pressure on the metal
via the electromagnetic field, the metals in the alloy start pulverizing quickly
and combine to form a flowing molten ball. This is the most suitable time for
starting the injection operation. The injection must be done at the right time;
otherwise, the alloy shall burn due to overheating.
-Press the “Inject” button.
-Press the “Stop” button after 15 seconds to stop the arm from rotating.
-Wait about 30 seconds for the machine to automatically unlock the top lid.
-Open the top lid.
-Bring the cylinder out of the machine carefully by using the special tool(pliers)
and put the cylinder in a proper place.