1.60
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
11. Digital Wrench will begin the learn procedure by
checking for faults. If the software determines there is
insufficient battery voltage to complete the process, it
is here when the software will stop and instruct the
user to charge the battery.
12. If no faults are encountered, and there is sufficient
battery voltage to proceed, the learn procedure will
commence.
NOTICE
The ECU will command the EV actuator relay to open
and close several times during the procedure. The
instrument cluster or PIDD will turn on and off each time
the relay is closed and opened. This is normal and
critical to the completing the learning procedure. The
actuator will also be heard moving back and forth as the
ECU sets the travel limits.
13. At the end of the procedure, the software will check
for any faults that may have occurred.
14. If no faults are encountered, this screen will appear
noting the procedure has successfully completed.
Press the red X button to return to the main menu.
15. If a fault were to occur, an error screen will appear
describing what the fault was and how to resolve the
issue. Typically, the fault will be caused by a partially-
charged battery or loose wire connector as noted by
this error screen.
