Polaris 600 RUSH 2011 Owner'S Manual Download

Page: 54 / 135

THE PERFECT FIT

Handlebar Adjustments

Handlebar Position

1. Loosen the four bolts on

the bottom of the adjuster
block. If necessary, pry the
blocks apart with a screw-
driver.

2. Adjust the handlebar for-

ward or rearward to the
desired position.

3. Tighten the bolts. Torque

the bolts to 13-16 ft. lbs.
(18-22 Nm).

Handlebar Angle

1. Loosen the four bolts on

the top of the adjuster
block. If necessary, pry the
blocks apart with a screw-
driver.

2. Adjust the handlebar for-

ward or rearward to the
desired angle.

3. Tighten the bolts. Torque the bolts to 13-16 ft. lbs. (18-22 Nm).

Loosen top bolts to adjust
handlebar angle

Loosen bottom bolts to
adjust handlebar position

Summary of Contents for 600 RUSH 2011








































































































































Search results

Summary of Contents for 600 RUSH 2011

Reviews:

Related manuals for 600 RUSH 2011

Brands by name

Popular brands

Polaris 600 RUSH 2011, Owner'S Manual

Search results

Summary of Contents for 600 RUSH 2011

Reviews:

Related manuals for 600 RUSH 2011

Brands by name

Popular brands