Polaris 600 IQ Touring Page 130 Owner'S Manual Download

Page: 130 / 141

127

WARRANTY

Limitations of warranties and remedies

ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-

TICULAR PURPOSE) ARE LIMITED IN DURATION TO THE ABOVE ONE YEAR

WARRANTY PERIOD. POLARIS FURTHER DISCLAIMS ALL EXPRESS WAR-

RANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations

on how long an implied warranty lasts, so the above limitation may not apply to you if

inconsistent with controlling state law.

How to Obtain Warranty Service

If your snowmobile requires warranty service, you must take it to a Polaris dealer autho-

rized to repair Polaris snowmobiles. When requesting warranty service you must present

your copy of the Warranty Registration form to the dealer. (The cost of transportation to

and from the dealer is YOUR responsibility). Polaris recommends that you use your

original selling dealer; however, you may use any Polaris Servicing Dealer to perform

warranty service.
Please work with your dealer to resolve any warranty issues. Your dealer will contact the

appropriate personnel at Polaris if additional assistance is needed.
This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.
If any of the above terms are void because of state or federal law, all other warranty

terms will remain in effect.

Engine Oil

1. Mixing oil brands or using non-recommended oil may cause engine damage. We rec-

ommend the use of Polaris engine oil.
2. Damage resulting from the use of non-recommended lubricants may not be covered

by warranty.

Summary of Contents for 600 IQ Touring














































































































































Search results

Summary of Contents for 600 IQ Touring

Reviews:

Related manuals for 600 IQ Touring

Brands by name

Popular brands

Polaris 600 IQ Touring, Owner'S Manual

Search results

Summary of Contents for 600 IQ Touring

Reviews:

Related manuals for 600 IQ Touring

Brands by name

Popular brands