manualshive.com logo in svg

Polaris 600 INDY VOYAGEUR, Owner'S Manual

The Polaris 600 INDY VOYAGEUR is a powerful and versatile snowmobile designed for adventurous riders. Gain complete control and conquer any terrain with its exceptional performance and reliability. Explore the great outdoors confidently with the help of the detailed and comprehensive Owner's Manual, available for free download exclusively at manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

77

MAINTENANCE

Periodic Maintenance Interval Table

Item

See 

Page

Frequency

150 mi.

(240 km)

500 mi.

(800 km)

1000 mi.

(1600 km)

2000 mi.

(3200 km)

Pre-

Season

BRAKES

Hose Routing

--

I

I

I

I

Hose Condition

--

I

I

I

I

Fluid Leaks

--

I

I

I

I

Brake Pads

92

I

I

I

I

Brake Disc

--

I

I

I

I

Parking Brakes

57

I

I

I

I

Brake System

56, 92

I

Brake Fluid

93

I

FUEL MANAGEMENT

Idle RPM

--

I

I

I

Throttle Lever

70

I

I

I

I

I

Oil Pump Lever 
(synchronize)

--

I

I

I

Throttle Position Sensor

--

I

I

I

Fuel Lines

83

I

I

I

I

Fuel Filter

83

R - Every 2000 mi. (3200 km) or Every 2 years

Oil Filter

86

R

Oil Lines

86

I

I

I

Air Box

--

I

I

I

I

I

ELECTRICAL

Auxiliary Shut-Off 
Switch

60

I

I

I

I

I

Throttle Safety Switch

69

I

I

I

I

I

Ignition Switch

--

I

I

I

I

I

Taillight

60

I

I

I

I

I

Brakelight

60

I

I

I

I

I

Headlight

60

I

I

I

I

I

Summary of Contents for 600 INDY VOYAGEUR









































































































































Reviews:

No comments

Related manuals for 600 INDY VOYAGEUR

Yamaha RX10RTL Supplemental Service Manual preview
RX10RTL
Brand: Yamaha Pages: 355

Brands by name

Popular brands

Load more brands