manualshive.com logo in svg

Polaris 600 INDY VOYAGEUR, Owner'S Manual

The Polaris 600 INDY VOYAGEUR is a powerful and versatile snowmobile designed for adventurous riders. Gain complete control and conquer any terrain with its exceptional performance and reliability. Explore the great outdoors confidently with the help of the detailed and comprehensive Owner's Manual, available for free download exclusively at manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

133

INDEX

S

Ski Skags. . . . . . . . . . . . . . . . . . . . .  107
Ski Toe Settings  . . . . . . . . . . . . . . .  106
Slide Rail and Track Cooling . . . . . .  65
Snow Conditions. . . . . . . . . . . . . . . .  16
Spark Plug Condition . . . . . . . . . . . .  85
Spark Plug Inspection . . . . . . . . . . . .  85
Spark Plug Recommendations  . . . . .  84
Spark Plugs . . . . . . . . . . . . . . . . .   84-85
Speed. . . . . . . . . . . . . . . . . . . . . . . . .  13
Speed Display . . . . . . . . . . . . . . . . . .  36
Spring Preload. . . . . . . . . . . . . . .  49, 51
Standard/Metric Display . . . . . . . . . .  38
Starting the Engine . . . . . . . . . . .   61-62
Starting the Engine, Restarting . . . . .  62
Steering Inspection . . . . . . . . . . . . .  105
Steering System  . . . . . . . . . . .   105-108
Steering System Inspection. . . . . . . .  58
Stopping, Emergency . . . . . . . . . . . .  72
Storage, Cargo  . . . . . . . . . . . . . . . . .  28
Storage, Daily . . . . . . . . . . . . . . . . . .  73
Storage, Tools . . . . . . . . . . . . . . . . . .  28
Storage,Seasonal/Extended. . .   112-113
Survival Preparation . . . . . . . . . . . . .  12
Suspension Adjustments . . . . . . .   48-51
Suspension Inspection, Pre-Ride  . . .  54
Suspension Lubrication, Rear . . . . . .  80

Switches

Engine Stop Switch  . . . . . . . . . . .  69
Handlebar Grip Warmer Switch  .  27
Headlight Dimmer Switch . . . . . .  27
Ignition Switch . . . . . . . . . . . . . . .  60
Mode/Select Buttons  . . . . . . . . . .  32
Mode/Set Switch  . . . . . . . . . . . . .  32
Tether Switch . . . . . . . . . . . . . . . .  60
Throttle Safety Switch . . . . . . . . .  69
Thumbwarmer Switch . . . . . . . . .  27

T

Taillight/Brakelight Replacement. . .  95
Tether Switch . . . . . . . . . . . . . . . . . .  60
Throttle Lever . . . . . . . . . . . . . . . . . .  70
Throttle Lever Inspection . . . . . . . . .  55
Throttle Safety Switch  . . . . . . . .  55, 69
Tool Kit. . . . . . . . . . . . . . . . . . . . . . .  28
Torsion Spring Preload . . . . . . . . . . .  50
Towing  . . . . . . . . . . . . . . . . . . . . . . .  73

Track

Alignment  . . . . . . . . . . . . . . . . .  104
Inspection . . . . . . . . . . . . . . . . . .  101
Lubrication . . . . . . . . . . . . . . . . .  101
Tension. . . . . . . . . . . . . . . .   102-103

Track Care for Storage . . . . . . . . . .  113
Track Inspection . . . . . . . . . . . . . . . .  58
Track Maintenance . . . . . . . . .   101-104
Track Safety . . . . . . . . . . . . . . . . . . .  10
Track Warm-Up . . . . . . . . . . . . . . . .  65
Track Warning  . . . . . . . . . . . . . . . . .  23
Transporting the Snowmobile. . . . .  112
Troubleshooting, Drive Belt . . . . . .  119
Troubleshooting, Drive System  . . .  118
Troubleshooting, Engine. . . . . . . . .  117
Troubleshooting, Suspension . . . . .  120
Tune-Up  . . . . . . . . . . . . . . . . . . . . .  112

V

Vehicle Identification Numbers . . . . .  7

W

Windchill  . . . . . . . . . . . . . . . . . . . . .  20

Summary of Contents for 600 INDY VOYAGEUR









































































































































Reviews:

No comments

Related manuals for 600 INDY VOYAGEUR

Brands by name

Popular brands

Load more brands