background image

37

THE PERFECT FIT

Traction Products

n

Carbide Skags

A skag is a replaceable bar attached to the underside of the ski to assist 

in turning the snowmobile and to prevent ski wear caused by contact 

with roads and other bare terrain.
Inspect skags frequently. Worn skags may reduce steering and braking 

control on hard-packed snow and ice. Replace worn skags to maintain 

proper balance and vehicle control.

WARNING!

Loss of control can result in serious personal injury or death. 

Proper balance of traction products on the skis and track must be maintained to 

obtain proper vehicle control on hard-packed snow or ice. See your dealer for 

assistance.

Accessories

Polaris offers a wide range of accessories for your snowmobile to help 

make each ride more enjoyable.
Use only Polaris parts and accessories on your Polaris snowmobile. Use 

of unapproved parts and accessories may result in:
• Non-compliance with government/industry requirements
• Voiding of warranty
• Injury to self or others
This applies, but is not limited to the following areas: brakes, clutches, 

fuel systems, and exhaust systems.

Tip:

Exhaust systems are critical safety areas that must use approved Polaris 

parts. Please see your Polaris dealer for service.

Summary of Contents for 500 IQ Shift


























































































































Reviews: