Polaris 4X4 700 EFI Owner'S Manual Download

Page: 68 / 134

MAINTENANCE

Engine Oil

Always check and change the engine oil at the intervals outlined in the

Periodic Maintenance Chart beginning on page 58. Always change the

oil filter whenever changing oil.

Premium 4 Synthetic Oil

Polaris Premium 4 All Season Synthetic engine oil has been specially

formulated for use in Polaris 4-cycle engines. It's a fully synthetic, high

performance, multi-viscosity oil designed to provide the ultimate in

lubrication performance and protection. See page 112 for the part num-

bers of Polaris products.
Premium 4 possesses unsurpassed film strength over the widest possible

temperature range. It resists viscosity and frictional breakdown in ambi-

ent temperatures from -40

F. to 120

F. Its exceptional frictional prop-

erties result in more efficient operation, more power output and lower

fuel consumption.
Although Polaris Premium 4 is the only oil recommended for use in this

engine, use of any API certified "SH" oil is allowable as long as it's 0W-

40. Oil may need to be changed more frequently if Polaris Premium 4 is

not used. Follow the manufacturer's recommendations for ambient tem-

perature operation.

CAUTION

Mixing brands or using a non-recommended oil may cause serious engine

damage. We recommend the use of Polaris Premium 4 All Season synthetic

oil or API certified "SH" oil, 0W-40. Never substitute or mix oil brands. Use

only 0W-40.

WARNING

Vehicle operation with insufficient, deteriorated, or contaminated engine oil

will cause accelerated wear and may result in engine seizure, accident, and

injury. Always perform the maintenance procedures as outlined in the

Periodic Maintenance Chart.

Summary of Contents for 4X4 700 EFI







































































































































Search results

Summary of Contents for 4X4 700 EFI

Reviews:

Related manuals for 4X4 700 EFI

Brands by name

Popular brands

Polaris 4X4 700 EFI, Owner'S Manual

Search results

Summary of Contents for 4X4 700 EFI

Reviews:

Related manuals for 4X4 700 EFI

Brands by name

Popular brands