Polaris 4X4 700 EFI Page 16 Owner'S Manual Download

Page: 16 / 134

SAFETY

Operator Safety

Equipment Modifications

We are concerned for the safety of our customers and for the general

public. Therefore, we strongly recommend that consumers do not install

on a Polaris

RANGER

any equipment that may increase the speed or

power of the vehicle, or make any other modifications to the vehicle for

these purposes. Any modifications to the original equipment of the vehi-

cle create a substantial safety hazard and increase the risk of bodily

injury.
The warranty on your Polaris

RANGER

is terminated if any equipment

has been added to the vehicle, or if any modifications have been made to

the vehicle, that increase its speed or power.

NOTE:

The addition of certain accessories, including (but not limited to) mow-

ers, blades, tires, sprayers, or large racks, may change the handling

characteristics of the vehicle. Use only Polaris-approved accessories,

and familiarize yourself with their function and effect on the vehicle.

WARNING

Make sure your

RANGER

is in excellent operating condition at all times. We

strongly recommend that the operator check all safety components before

each ride.
Polaris

RANGER

s are designed to provide safe operation when used as

directed. Failure of critical machine components may result from operation

with any modifications, especially those that increase speed or power. The

RANGER

may become aerodynamically unstable at speeds higher than

those for which it is designed. Loss of control may occur at higher speeds.

Modifications may also create a safety hazard and lead to bodily injury.
Do not make any modifications to your

RANGER

Summary of Contents for 4X4 700 EFI







































































































































Search results

Summary of Contents for 4X4 700 EFI

Reviews:

Related manuals for 4X4 700 EFI

Brands by name

Popular brands

Polaris 4X4 700 EFI, Owner'S Manual

Search results

Summary of Contents for 4X4 700 EFI

Reviews:

Related manuals for 4X4 700 EFI

Brands by name

Popular brands