Instr 9927951
Rev 02 2017-11
Page 9 of 12
WIRELESS REMOTE OPERATION
• When properly installed, the wireless remote will
allow you to operate the winch from on or off the
vehicle.
• To use the wireless remote, hold the small "On/Off"
button for three seconds or until the LED light on the
remote turns on. If the vehicle is on so that the
winch is receiving power, the wireless remote
should operate the winch as if you were using the
manual winch switch. If the remote is not operating
properly, see the troubleshooting information at the
end of the instructions.
• The remote will automatically turn itself off after 30
seconds of inactivity. You will therefore need to turn
the remote back on if it has been more than 30
seconds since prior use.
• To manually turn off the remote, hold the small "On/
Off" button for 3 seconds or until the LED light turns
off.
• See the illustration below for proper wireless remote
operation.
WIRED REMOTE OPERATION
• To use the wired remote make sure it is connected
to the winch. Once connected, the wired remote
operates much like the wireless remote and will
allow you to operate the winch from on or off the
vehicle.
• To use the wired remote, depress and hold the
“OUT” button to extend cable. To recover cable,
depress and hold the “IN” button. If the wired
remote is not operating properly, see the
troubleshooting information at the end of the
instructions.
