background image

71

WINCH GUIDE

Winch Operation

4. Always use the hook strap when 

handling the hook.

WARNING!

Never put your fingers into 

the hook. This could lead to SEVERE 
INJURY.

A.

Attach the hook itself onto the 
load or use a tow strap or chain 
to secure the load to the winch 
cable.

Tip:

A “tow strap” is NOT intended to stretch. A “recovery strap” is designed to 
stretch.

WARNING!

Never use a recovery strap when winching due to the excessive 

energy that can be released if the winch cable breaks. This can result in 
SEVERE INJURY or DEATH. See the 

Shock Loading

 section on page 76.

B.

Never hook the winch cable back onto itself. This will damage the 
winch cable and may result in winch cable failure. 

WARNING!

Replace the winch cable at the first sign of damage to prevent 

SEVERE INJURY or DEATH in the event of failure. For your safety, always 
replace POLARIS winch parts (including the cable) with genuine POLARIS 
replacement parts available at your authorized POLARIS dealer.

C.

If possible, keep the winch cable aligned with the centerline of the 
winching vehicle. This will help the spooling of the winch cable and 
reduce the load on the fairlead.

D.

If freeing a stuck vehicle by attaching to a tree, use an item such as a 
tow strap to avoid damaging the tree during winch operation. Sharp 
cables and chains can damage and even kill trees. Please remember 
to TreadLightly® (treadlightly.org).

E.

Before operating the winch, be sure 
that the safety latch on the winch 
cable hook is fully seated when the 
load is attached.

F.

Never operate your winch with a 
damaged hook or latch. Always 
replace damaged parts before using 
the winch.

NO

YES

NO

YES

Summary of Contents for 2016 RZR XP Turbo























































































































































Reviews: