100
MAINTENANCE
Cooling System
Pressure Tank Coolant Level
Always check and change the coolant at the intervals outlined in the
Periodic Maintenance Chart beginning on page 79. Maintain the coolant
level within one inch (2.5 cm) of the cold full mark on the side of the
pressure tank (when the fluid is cool).
1. Position the vehicle on a
level surface.
2. Remove the hood. See page
30.
3. View the coolant level
through the side of the
pressure tank.
CAUTION!
Escaping steam can
cause burns. Never remove the
pressure cap while the engine is
warm or hot. Always allow the
engine to cool before removing the
pressure cap.
4. Remove the pressure cap
and use a funnel to add
coolant as needed. Maintain
the coolant level within one
inch (2.5 cm) of the cold full
mark on the side of the
pressure tank (when the
fluid is cool).
5. Reinstall the pressure cap.
Tip:
If coolant must be added often, or if the pressure tank runs completely dry,
there may be a leak in the system. Your POLARIS dealer can inspect the
cooling system.
Pressure
Cap
Coolant
Level
