Polaris 2014 RANGER 400 Owner'S Manual Download | Manualshive

Page: 84 / 106

background image

82

MAINTENANCE

Cleaning and Storage

Chrome Wheel Care (if equipped)

Proper maintenance will protect chrome wheels from corrosion, preserve wheel life and
ensure a “like new” appearance for many years. Chrome wheels exposed to road salt (or salt
in the air in coastal areas) are more susceptible to corrosion if not properly cleaned. Clean
chrome wheels more often if they're exposed to salt or other corrosive elements.

1. Wash chrome wheels frequently. Use a mild detergent. Never use abrasive cleaners on

plated or painted surfaces.

2. Rinse well with clear water. Soap, detergents, salt, dirt, mud and other elements can

cause corrosion.

3. Polish the clean chrome wheels periodically. Use an automotive grade chrome polish.

4. Routinely and liberally apply a weather resistant wax to each polished chrome wheel.

Choose a product suitable for chrome finishes. Read and follow the product labels and
instructions.

Removing Corrosion

If light rust is found on the chrome finish, use steel wool (#0000-OTT grade) to remove it.
Gently rub the affected areas with the steel wool until the corrosion has been removed. Clean
and polish the wheel as outlined above.

Storage Tips

NOTICE:

Starting the engine during the storage period will disturb the protective film created by
fogging and damage could occur. Never start the engine during the storage period.

Clean the Exterior

Make any necessary repairs and clean the vehicle as recommended. See page 81.

Stabilize the Fuel

1. Fill the fuel tank.

2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer. Follow the

instructions on the container for the recommended amount. Carbon Clean removes water
from fuel systems, stabilizes fuel and removes carbon deposits from pistons, rings,
valves and exhaust systems.

3. Allow the engine to run for 15-20 minutes to allow the stabilizer to disperse through the

fuel in the tank and carburetor.

4. Drain the carburetor bowl.

Oil and Filter

Change the oil and filter. See page 57.

Air Filter / Air Box

1. Inspect and clean or replace the pre-cleaner and air filter. See page 67.

2. Clean the air box.

3. Drain the sediment tube.

«
...
82
83
84
85
86
...
»

Summary of Contents for 2014 RANGER 400











































































































Reviews:

No comments

Related manuals for 2014 RANGER 400

Brand: CadKat Pages: 11

Brand: BOMBARDIER Pages: 20

Brand: Madill Pages: 45

Brand: Hisun Pages: 116

Brand: Yamaha Pages: 26

Brand: Yamaha Pages: 130

Brand: Yamaha Pages: 116

Brand: Yamaha Pages: 120

Brand: Yamaha Pages: 154

Brand: Yamaha Pages: 160

Brand: Yamaha Pages: 162

Brand: Yamaha Pages: 184

Brand: Yamaha Pages: 328

Brand: Yamaha Pages: 409

Brand: Cectec Pages: 212

Brand: PRONAR Pages: 136

Brand: Baja motorsports Pages: 77

Brand: Mahindra Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands