Polaris 2014 RANGER 400 Page 17 Owner'S Manual Download | Manualshive

Page: 17 / 106

background image

15

SAFETY

Operator Safety

• Always use the proper size and type of tires specified in this manual. Always maintain

proper tire pressure as specified on safety labels.

• Never modify this vehicle through improper installation or use of non-POLARIS-

approved accessories.

• Never exceed the stated load capacity for this vehicle. Cargo should be properly

distributed and securely attached. Reduce speed and follow the instructions in this manual
for hauling cargo or pulling a trailer. Allow a greater distance for braking.

• Always place the transmission in PARK before getting out of the vehicle.
• Always stop the engine before refueling. Remove flammable material containers from the

box before filling them with fuel. Make sure the refueling area is well ventilated and free
of any source of flame or sparks. Gasoline is extremely flammable. See page 18 for fuel
safety warnings.

• Always remove the ignition key when the vehicle is not in use to prevent unauthorized use

by someone under the age of 16 or without a driver’s license and proper training, or
accidental starting.

FOR MORE INFORMATION ABOUT SAFETY, call POLARIS at 1-800-342-3764.

Equipment Modifications

Do not install any non-POLARIS-approved accessory or modify the vehicle for the purpose
of increasing speed or power. Any modifications or installation of non-POLARIS-approved
accessories could create a substantial safety hazard and increase the risk of bodily injury.

The warranty on your POLARIS vehicle will be terminated if any non-POLARIS-approved
equipment and/or modifications have been added to the vehicle that increase speed or power.

The addition of certain accessories, including (but not limited to) mowers, blades, tires,
sprayers, or large racks, may change the handling characteristics of the vehicle. Use only
POLARIS-approved accessories, and familiarize yourself with their function and effect on
the vehicle.

«
...
15
16
17
18
19
...
»

Summary of Contents for 2014 RANGER 400











































































































Reviews:

No comments

Related manuals for 2014 RANGER 400

Brand: JLG Pages: 62

Brand: Arctic Cat Pages: 174

Brand: Honda Pages: 83

1997 Fourtrax TRX250

Brand: Honda Pages: 155

Brand: Truxta Pages: 8

Wagon with tilt

Brand: Texas Pages: 42

Brand: Clam Corp Pages: 4

Brand: Clam Corp Pages: 6

ATV ELECTRIC POWERED

Brand: MINIMOTO Pages: 31

Brand: TRILECTRON Pages: 7

Brand: QERIDOO Pages: 36

Brand: Landoll Pages: 80

Brand: HAPERT Pages: 45

Brand: Taylor-Dunn Pages: 174

Brand: MANCO Pages: 16

Brand: Yamaha Pages: 54

Brand: Yamaha Pages: 112

Brand: Yamaha Pages: 398

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands