background image

13

SAFETY

Operator Safety

Rider Capacity

Driving 1-Up - 

Some POLARIS snowmobiles are designed for a single 

rider only. A decal on the 

console

 of these models indicates single rider 

operation.

Driving 2-Up - 

Some POLARIS snowmobiles are designed for up to 

two riders. A decal on the 

hood

 of these models indicates that the vehi-

cle is designed for one operator and one passenger only.

WARNING!

Control becomes more difficult with two people on board. More 

space is required to make turns, and longer distances are needed for stopping. 
Make sure the passenger remains seated behind the driver, facing forward, with 
both feet placed firmly on the running boards. Slow down

 

and avoid “jumping” 

your snowmobile.

Snowmobiles designed for two riders should never be operated with 
more than two people on board. When traveling with a passenger, it’s 
the driver’s responsibility to operate the snowmobile safely. 

Slow down! 

Control becomes more difficult with two people on board. 

More space is required to make turns, and longer distances are necessary 
for stopping.

Summary of Contents for 2014 600 IQ LXT
















































































































































Reviews: