Polaris 2014 600 IQ LXT Owner'S Manual Download Page 116

Page: 116 / 143

114

MAINTENANCE

Steering System

Ski Alignment

WARNING!

Improper ski alignment or adjustment may cause loss of steering

control, resulting in serious injury or death. Do not attempt to change the ski
alignment or camber adjustment. See your POLARIS dealer.

1. Place the handlebars in a straight-ahead position.

2. With only vehicle weight compressing the suspension, measure 10

inches (25.4 cm) forward from the center of the ski mounting bolt.
See illustration. At this point, measure between the skis. This is
measurement X.

3. Perform the same measurement rearward from the center of the ski

mounting bolt. This is measurement Y.

4. The X measurement should be 1/8-1/4 inch (3-6 mm) greater than

the Y measurement. If the skis are misaligned, see your dealer for
alignment correction as camber adjustment may also be affected.

10 in.

(25.4 cm)

10 in.

(25.4 cm)

Summary of Contents for 2014 600 IQ LXT
















































































































































Search results

Summary of Contents for 2014 600 IQ LXT

Reviews:

Related manuals for 2014 600 IQ LXT

Brands by name

Popular brands

Polaris 2014 600 IQ LXT, Owner'S Manual

Search results

Summary of Contents for 2014 600 IQ LXT

Reviews:

Related manuals for 2014 600 IQ LXT

Brands by name

Popular brands