Polaris 2008 Outlaw 525 IRS Owner'S Manual Download Page 65

Page: 65 / 220

Features and Controls

Parking Brake

1. Place the transmission in first

gear.

2. Squeeze and release the brake

lever two or three times, then

squeeze and hold.

3. Push the parking brake lock

down to engage the lock.

Release the brake lever.

4. To release the parking brake

lock, squeeze and release the

brake lever. The lock will auto-

matically disengage.

WARNING

Operating the ATV while the parking brake is engaged could result in an accident and serious injury

or death. Always check to be sure the parking brake is disengaged before operating.

Locked

Unlocked

Summary of Contents for 2008 Outlaw 525 IRS





























































































































































































































Search results

Summary of Contents for 2008 Outlaw 525 IRS

Reviews:

Related manuals for 2008 Outlaw 525 IRS

Brands by name

Popular brands

Polaris 2008 Outlaw 525 IRS, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 525 IRS

Reviews:

Related manuals for 2008 Outlaw 525 IRS

Brands by name

Popular brands