Polaris 2008 Outlaw 525 IRS Owner'S Manual Download Page 171

Page: 171 / 220

168

Maintenance

Front Suspension

Suspension Set-Up

1. Position the vehicle on a level surface.
2. Stop the engine.
3. Elevate the front of the vehicle by placing

a suitable stand under the frame.

NOTE:

The tires should be barely touching the

ground and the suspension should be at

full rebound.

4. Measure the distance from the ground to

the bottom of the lower front bumper bolt.

Note this measurement for later use.

5. Remove the stand and have a rider sit

comfortably on the seat with hands on the

handlebars.

Summary of Contents for 2008 Outlaw 525 IRS





























































































































































































































Search results

Summary of Contents for 2008 Outlaw 525 IRS

Reviews:

Related manuals for 2008 Outlaw 525 IRS

Brands by name

Popular brands

Polaris 2008 Outlaw 525 IRS, Owner'S Manual

Search results

Summary of Contents for 2008 Outlaw 525 IRS

Reviews:

Related manuals for 2008 Outlaw 525 IRS

Brands by name

Popular brands