Polaris 2005 Phoenix 200 Owner'S Manual Download

Page: 95 / 111

MAINTENANCE AND LUBRICATION

Cleaning and Storage

Storage Tips

See page 99 for the part numbers of Polaris products.

Fluid Levels

Inspect fluid levels and change fluids if necessary.

Transmission

Brake Fluid

Engine Fogging

Use Polaris Engine Fogging Oil. Follow label directions carefully.

CAUTION

Starting the engine during the storage period will disturb the

protective oil film, which can lead to engine damage. Never start

the engine during the storage period.

Lubricate

Inspect all cables and lubricate with Polaris Cable Lubricant. Follow

lubrication guidelines in the maintenance section of the service or

owner’s manual to completely grease and lubricate the entire vehicle

with Polaris Premium All Season Grease.

Storage Area/Covers

1. Make sure tire pressure is at specification.
2. Using suitable supports under the frame, raise the vehicle slightly

so that the tires are not touching the ground.

3. Be sure the storage area is well ventilated.
4. Cover the machine with an appropriate cover. Do not use plastic or

coated materials, as they do not allow proper ventilation to prevent

condensation, corrosion and oxidation.

Summary of Contents for 2005 Phoenix 200
















































































































Search results

Summary of Contents for 2005 Phoenix 200

Reviews:

Related manuals for 2005 Phoenix 200

Brands by name

Popular brands

Polaris 2005 Phoenix 200, Owner'S Manual

Search results

Summary of Contents for 2005 Phoenix 200

Reviews:

Related manuals for 2005 Phoenix 200

Brands by name

Popular brands