Polaris 2005 Phoenix 200 Owner'S Manual Download

Page: 24 / 111

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Stalling, rolling backwards

or improperly dismounting

while climbing a hill.
WHAT CAN HAPPEN
The vehicle could overturn.
HOW TO AVOID THE

HAZARD
Maintain steady speed

when climbing a hill.

If all forward speed is lost:
Keep your weight uphill.
Gradually apply the front brakes (right

lever).
When fully stopped, apply the rear brakes and lock the parking

brake.
Dismount on uphill side, or to either side if ATV is pointed straight

uphill. Turn the ATV around and remount, following the procedure

described in the owner’s manual. See page 54.

If the ATV begins rolling backwards:
Keep weight uphill.
Apply the front brake gradually.
Never apply the rear brake while rolling backwards.
Never apply engine power.
When fully stopped, apply the rear brake as well, and then lock

the parking brake.
Dismount on uphill side, or to either side if ATV is pointed straight

uphill. Turn the ATV around and remount, following the procedure

described in the owner’s manual. See page 54.

Summary of Contents for 2005 Phoenix 200
















































































































Search results

Summary of Contents for 2005 Phoenix 200

Reviews:

Related manuals for 2005 Phoenix 200

Brands by name

Popular brands

Polaris 2005 Phoenix 200, Owner'S Manual

Search results

Summary of Contents for 2005 Phoenix 200

Reviews:

Related manuals for 2005 Phoenix 200

Brands by name

Popular brands