Polaris 2004 RMK Page 64 Owner'S Manual Download

Page: 64 / 127

OPERATION

Emergency Starting

Your machine is equipped with a tool kit containing essential tools for

emergency use. Machines equipped with electric start have a recoil for

emergency starting. On manual start models, an emergency start strap

is provided for use if the recoil starter system fails.

To use the emergency start strap:
1. Open the clutch guard.

2. Push on the inner

sheave of the clutch

and rotate clockwise

slightly to relieve belt

tension.

3. Starting at one of the

tower struts, wind the

strap counterclockwise

around the clutch as

shown.

4. Pull the strap abruptly so the strap comes free of the clutch while

starting the engine.

Serious injury can result from wrapping the start strap around your

hand while using the emergency starting procedure. DO NOT

wrap the start strap around your hand. Keep all bystanders away

from the snowmobile when using the emergency starting

procedure.

WARNING

Summary of Contents for 2004 RMK
































































































































Search results

Summary of Contents for 2004 RMK

Reviews:

Related manuals for 2004 RMK

Brands by name

Popular brands

Polaris 2004 RMK, Owner'S Manual

Search results

Summary of Contents for 2004 RMK

Reviews:

Related manuals for 2004 RMK

Brands by name

Popular brands