Polaris 2004 RMK Page 109 Owner'S Manual Download

Page: 109 / 127

107

MAINTENANCE

Battery

Battery Fluid

A poorly maintained battery will

deteriorate rapidly. Check the battery

fluid level often. The fluid level should

be kept between the upper (1) and lower

(2) level marks.

Battery electrolyte is poisonous. It contains acid! Serious burns

can result from contact with the skin, eyes, or clothing. If contact

occurs, seek immediate medical attention.

KEEP OUT OF REACH OF CHILDREN.
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of water or milk. Call physician

immediately.
EYES: Flush with water for 15 minutes and get prompt medical

attention.
Batteries produce explosive gases. Keep sparks, open flames,

cigarettes, etc. away. Ventilate when charging or using in closed

space. Always shield eyes when working near batteries.

WARNING

Summary of Contents for 2004 RMK
































































































































Search results

Summary of Contents for 2004 RMK

Reviews:

Related manuals for 2004 RMK

Brands by name

Popular brands

Polaris 2004 RMK, Owner'S Manual

Search results

Summary of Contents for 2004 RMK

Reviews:

Related manuals for 2004 RMK

Brands by name

Popular brands