iNS Setup Box Operation Manual
© 2021 Polara Doc. 350-091 Rev. A-25545 03/18/2021
1 of 3
iNS Setup Box
Operation Manual
Specifications:
Size:
6.8
”
Length
4 ½”
Width
2
”
Height
Weight: 1 lb.
Operating Temperature: 0° C to +50° C
Operating Voltage: 24V DC
Description:
The iNS Setup Box (iNS-SUB) is a special tool that provides a convenient method of operating one Polara
iNS/iDS/iNavigator 3-Wire Push Button Station in a bench top environment, where it can be setup and
tested before installation on the street. The iNS Setup Box simulates the operation of a standard
pedestrian signal head with an iPHCU3W/S installed. The iNS Setup Box is also able to simulate the
function of the Ped Call interface.
Note:
The iNS-SUB can also operate an iN2/iNS2/iDS2 PBS, that can also be used as a 3-Wire PBS. Most
setup, programming, and testing can be performed in this mode (except for cabinet programming
- which only happens in a 2-Wire connection mode). Connect the unit as a 3-Wire to the iNS-SUB.
