Polar Refrigeration DL893-A, Instruction Manual

Page: 3 / 8

2
Telephone Helpline : 1300225960
Fitting the Shelves
1.
Place one set of shelf guides on either side of the cabinet at the desired height.
2.
Slide the shelf into place.
3.
Repeat for the remaining shelves..
Operation
Storing Food
To get the best results from your POLAR appliance, follow these instructions:
•
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
• Do not place uncovered hot food or liquid inside the appliance.
• Wrap or cover food where possible.
• Do not obstruct the fans inside the appliance.
• Avoid opening the doors for prolonged periods of time.
Turn On
1.
Close the door(s) of the appliance.
2.
Ensure the power switch is set to [O] and turn on at the socket.
3.
Switch on the Power [I]. The current temperature within the appliance is displayed.
Control Panel
To See the Setpoint
Push and immediately relese the SET key: the display will show the Setpoint value
Changing the Setpoint
1) Push the SET key for more than 2 seconds to change the Setpoint value
2) The value of the set point will be displayed and the COMPRESSOR LED starts
blinking
3) To change the Set value push the UP and DOWN buttons within 10 seconds
4) To store the new Setpoint push the SET key or wait 10 seconds
Manual Defrost
The appliance will automatically run a defrost cycle every six hours.
To manually defrost the appliance:
1.
Press and hold the aux button for more then 2 seconds.
2.
The defrost cycle will start immediately and the Defrost LED illuminates. .
3.
The next automatic defrost will start six hours after the manual defrost has finished.
Note: The cycle starts from the time the appliance is initially powered up.
Note: Starting a manual defrost also resets the automatic defrost timer.