Polar Electro S710i, User Manual

Page: 50 / 122

C 48
Exercise recording mode
Autostart for recording a cycling exercise
If you start from the Time of day display, press OK briefly to enter the
Measure mode. Your exercise recording automatically starts/ pauses as you
start/ stop cycling.
If you want to record cycling information only, start cycling after the heart
rate reading 00 appears on the display. If you want to record both cycling
and heart rate information
keep the bike still until your heart rate
appears on the display. If you are not using speed or cadence sensor select
the Autostart off in Bicycle Feature Settings. This way you can avoid the
automatic exercise recording starting accidentally.
If you are starting from the Time of day display, press and hold OK.
Exercise information will be stored in an exercise file only when the
stopwatch is running. The ongoing recording is indicated with a graphic
bar that runs continuously on the display.
If your preset exercise requires cycling settings , Set Bike is displayed for a
few seconds. In order to start the exercise set you need to select bike 1 or 2 by
pressing and holding the down button until the desired set is displayed.
The choice is displayed in the lower right corner:
b0= bike off
b1= bike 1 settings on
b2= bike 2 settings on