B
33
6. Press OK to start setting the fitness test. On/OFF starts to flash.
7. Scroll up or down to set the fitness test on or off. Press OK.
Predicted maximum heart rate on/off
(HR
max
-p)
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until HRmax-p is displayed.
6. Press OK to start setting the HR
max
-p. On/OFF starts to flash.
7. Scroll up or down to set the HR
max
-p on or off. Press OK.
HR
max
-p can be turned on only if Polar Fitness Test is on.
Altitude and thermometre on/off
If you start from the Time of day display, repeat steps 1-4
5. Scroll up or down until Altitude is displayed.
6. Press OK to start setting the altitude measurement and thermometre.
On/OFF starts to flash.
7. Scroll up or down to set the altitude on or off. Press OK.
If you turned Altitude off, skip the rest of the altitude settings.
8. If you turned Altitude on, “Wait...” appears for a few seconds.
9. Altitude and a flashing number appear. Start adjusting the starting
point altitude. Adjustable units of 1/ 2 can be changed by pressing and
holding the signal/light button.
Scroll up or down until the desired altitude is displayed. Press OK.
It is recommended that you reset the altitude whenever a reliable
reference is available.
To continue setting your settings, press the stop button or to return to the
Time of day display, press and hold the stop button.
Summary of Contents for S710i
