Stop the stopwatch
You can see the total elapsed time in the lower
line of the display
Press the left button shortly.
The stopwatch stops.
2. Press the left button briefly
The stopwatch continues running.
You
may
need this function for example if you
have to stop your exercise momentarily because
of traffic lights etc.
Stop heart rate measurement,
recall training information and
return to Time of Dav
10
Press and hold the left button
for second to stop heart
rate measurement and to
II training
appears in the
upper
of the
appears on
lower
of
the display
Press the left button
briefly to return to display
showing Time of Day.
Time of Day appears in
the
Your last training information is in the memory of
the
Polar
Edge NV until the next time you measure
heart rate. To review this last training information,
in the display showing
Time
of Day, press the left
button three times. After this, to return to Time of
Day, press the left button once. Note: When you
start heart rate measurement again your previous
training information will be replaced by the new
one. You cannot recall the replaced information
later.
NOTE: To return to display showing Time of Day
at any point
in the setting procedure, press both
buttons simultaneously.
Begin with display showing
Time of Day.
Press the left button to
enter Target Zone setting.
The Upper Limit reading
appears
in the
The upper
indicat-
ing the Upper Limit, ap-
pears the upper
corner of the
Press the right button to select the correct
value for the Upper
