6
AU
Telephone Helpline: 1300225960
Operation
Filling
1. Ensure to switch Off and unplug the appliance.
2.
Preparing your product:
Polar recommends
that you use syrup mix designed for use in
Slush Machines. Dilute and mix the concentrate
with water in a container, following the
manufacturer’s instructions.
NOTE - Any
mixture used must have a minimum
sugar content of 13% - lower sugar
content mixture will freeze solid and can
damage the augers and gear motors.
Damage caused by using incorrect mix
will invalidate the warranty.
3.
Removing the lid:
Lift the rear part to
release. Then remove directly.
4. Pour the mixture into the bowl.
WARNING: Do not fill the tank
with hot liquid.
Do not let the level exceed the
‘MAX’ level line marked on the
front of the bowl.
5. Re-locate the lid.
WARNING: There are moving
parts inside the bowl, which
may cause injuries. Therefore,
ensure to turn off and unplug
the appliance before carrying
out any operations inside the
bowl.
Getting started
1. Connect the appliance to a mains power
supply.
2. Press the on/off switch
.
Selecting the working mode
• Press the mode button
to select the
working mode.
• There are 3 modes in total:
Mode
Mode icon
Description
Slush
Slush mode is selected
Juice
Juice mode is selected
OFF
The bowl will stop
stirring and refrigerating.
To serve with slush
1. Press the mode button
to select the slush
mode. The icon
illuminates.
2. Press buttons “+” and “-” to select the
slush hardness setting from 1 (softest) to 7
(hardest).
To serve with cold drinks
1. Press the mode button
to select the juice
mode. The icon illuminates.
2. Press buttons “+” and “-” to select the juice
temperature from 1
°
C to 7
°
C.
Note: When the shop is out
of service and there is still
remaining product in the bowl,
we highly recommend setting
all bowls to Juice mode, as in
this mode bowl stirring and
refrigerating are still ON so
as to keep the product fresh
(Temperature from 1°C to 7°C).
To simply clean the desired bowl
1. Press the mode button
for six seconds.
2. “C” will be shown on the display.
Notes:
• In this mode no refrigerant gas will flow
into, but the auger is still rotating to assist
the cleaning process. Please fill warm and
clean water into the corresponding bowl (not
exceeding the maximum level marked on the
bowl).
• If desired to perform a thorough cleaning or
sanitization to the machine, please ensure the
machine is powered off. For details, please see
Section “Cleaning, Care & Maintenance”.
DB331-A_DB332-A_DB843-A_A5_v2_20210705.indb 6
DB331-A_DB332-A_DB843-A_A5_v2_20210705.indb 6
2021/7/5 10:17
2021/7/5 10:17
